Product Focus – Power Supplies
Power supplies provide reverse polarity
Designed for base-station installation, the PS15A and the PS20A from Geiger Communications are power supplies equipped with reverse polarity and short-circuit protection to minimize risk due to improper installation or use. These products incorporate switching technology and also allow operation on either 110Vac or 220Vac. The PS15ABB and PS20ABB offer a battery charger and switching circuitry to automatically revert to battery mode if the ac power is interrupted, with no interruptions in vital communications networks. With the optional hoods, any mobile can be converted to a reliable base station.
WWW.GEIGERCOMM.COM
Power system includes battery backup
The N+1 power system from Samlex America is expandable by 20A modules from 40A-100A. Additional features include a built-in battery backup module with charging capability for external batteries, remote monitoring and indication, and V/A meter and operation LEDs. This system was designed using switch-mode technology and load-share circuitry. At 100 continuous-duty amps, the unit weighs 25 pounds.
WWW.SAMLEXAMERICA.COM OR 800-561-5885
Supplies offer sleek fit with any mobile radio
The Comm series 10A, 11A and 12A switching power supplies from ICT are designed to provide a sleek fit with any mobile radio. These supplies are available in three case sizes: AX (5.6″), AG (6.4″) and A (7.1″). These supplies are lightweight, cost-effective and minimize desktop clutter.
WWW.ICT-POWER.COM OR 604-888-6304
Converter eliminates need for filtering devices
The BTCPower SQ series from Broadband TelCom Power features a metal-shielded, low-profile, 100W quarter brick designed to prevent EMI and thus eliminating the need for ferrite beads or other EMI/RFI filtering devices. This shield also acts as a heat dissipating medium with large surface area, therefore eliminating the need for heat sink or forced air-cooling. Delivering 20A with efficiency (90%@5V), this model is useful for the high-energy power needs of the telecommunications industry.
WWW.BTCPOWER.COM OR 714-259-4888
System incorporates power accessories
Newmar’s Integrated Power System incorporates built-in battery backup, power accessories and auxiliary power inputs within a single 2RU (3.5″) chassis. This eliminates the need for system integration, component sourcing and installation. A regulated power supply/charger, backup battery, low-voltage battery disconnect and output metering are all pre-wired and calibrated within the unit for plug-and-play operation. Plug-in terminals are provided for easy wiring of a parallel rectifier, or external batteries for increased backup capacity.
WWW.NEWMARPOWER.COM OR 714-751-0488
System allows flexibility
Deltron’s L series is a compact hot swap, 200W power supply series in a 1U high package that provides system designers flexibility in placing system power. These power supplies provide 7W per cubic inch. Units can be used alone or combined to provide multiple outputs for powering a wide variety of computing and telecommunications applications. Features of the single-output L series include a 0.95 power factor and 80% efficiency. These supplies are self-cooled with an integral ball bearing fan and feature an enclosed chassis.
WWW.DELTRONINC.COM
